Synthesis of microporous polymers with exposed C60 surfaces by polyesterification of fullerenol.

Microporous polymers with exposed C60 surfaces have been synthesized by a new pathway of crosslinking fullerenol and terephthaloyl chloride or 1,3,5-benzenetricarbonyl trichloride via esterification. The resulting polymers are insoluble solids containing a large ratio of C60 with hydroxy groups and possess micropores with high specific surface area up to 657 m2 g-1. The microporous polymers thus obtained exhibit enhanced hydrogen spillover, which is a unique property of the C60 surface.

Irreversible deformation of hyper-crosslinked polymers after hydrogen adsorption.

Hyper-crosslinked polymers (HCPs) have been produced by the Friedel-Crafts reaction using anthracene, benzene, carbazole or dibenzothiophene as precursors and dimethoxymethane as crosslinker, and the effect of graphene oxide (GO) addition has been studied. The resulting HCPs were highly microporous with BET areas (ABET) between 590 and 1120 m2g-1. The benzene-derived HCP (B1FeM2) and the corresponding composite with GO (B1FM2-GO) exhibited the highest ABET and were selected to study their hydrogen adsorption capacities in the pressure range of 0.1 - 14 MPa at 77 K. The maximum H2 excess uptake was 2.1 and 2.0 wt% for B1FeM2 and B1FeM2-GO, respectively, at 4 MPa and 77 K. The addition of GO reduced the specific surface area but increased the density of the resultant HCP-GO composites, which is beneficial for practical applications and proves that materials giving higher gravimetric storage capacities are not necessarily those that offer higher volumetric capacities. H2 adsorption-desorption cycles up to 14 MPa showed irreversible deformation of both HCP and HCP-GO materials, which calls into question their application for hydrogen adsorption at pressures above 4 MPa.

APTES-Based Silica Nanoparticles as a Potential Modifier for the Selective Sequestration of CO2 Gas Molecules.

In this work, we have described the characterization of hybrid silica nanoparticles of 50 nm size, showing outstanding size homogeneity, a large surface area, and remarkable CO2 sorption/desorption capabilities. A wide battery of techniques was conducted ranging from spectroscopies such as: UV-Vis and IR, to microscopies (SEM, AFM) and CO2 sorption/desorption isotherms, thus with the purpose of the full characterization of the material. The bare SiO2 (50 nm) nanoparticles modified with 3-aminopropyl (triethoxysilane), APTES@SiO2 (50 nm), show a remarkable CO2 sequestration enhancement compared to the pristine material (0.57 vs. 0.80 mmol/g respectively at 50 °C). Furthermore, when comparing them to their 200 nm size counterparts (SiO2 (200 nm) and APTES@SiO2 (200 nm)), there is a marked CO2 capture increment as a consequence of their significantly larger micropore volume (0.25 cm3/g). Additionally, ideal absorbed solution theory (IAST) was conducted to determine the CO2/N2 selectivity at 25 and 50 °C of the four materials of study, which turned out to be >70, being in the range of performance of the most efficient microporous materials reported to date, even surpassing those based on silica.

Orientation Control of Trametes Laccases on a Carbon Electrode Surface to Understand the Orientation Effect on the Electrocatalytic Activity.

By using a carbon-coated anodic aluminum oxide (CAAO) film as a monolithic porous electrode for the immobilization of Trametes laccases (LACs), an attempt is made to control the orientation of LAC molecules toward the electrode surface simply by applying an electric potential to the CAAO film. Because the resulting film is characterized by a myriad of open, simple, and straight nanochannels with diameters as large as 40 nm, the O2 diffusion problem in pores is minimized, thereby making it possible to highlight the effect of such orientation on the electrocatalytic activity as a biocathode. It has been evidenced that LAC molecules are favorably oriented for a smooth electron transfer from the electrode when the LACs are immobilized with applying a positive voltage to the electrode, and such favorable orientation exhibits 3.7-times higher electrocatalytic activity than unfavorable orientation. Furthermore, the orientation mechanism has been rationally explained in terms of local surface chemistry on a LAC molecule.

Boron and nitrogen co-doped ordered microporous carbons with high surface areas.

Boron and nitrogen co-doped ordered microporous carbons with high surface areas are obtained by using NaY zeolite as a hard template and an ionic liquid, 1-ethyl-3-methylimidazolium tetracyanoborate (EMIT), as a BN source. An acetylene-gas supply during a pyrolysis is effective to avoid the unfavourable reaction of zeolite and EMIT.

Real Understanding of the Nitrogen-Doping Effect on the Electrochemical Performance of Carbon Materials by Using Carbon-Coated Mesoporous Silica as a Model Material.

The main aim of the present work is to precisely understand the sole effect of nitrogen doping on the electrochemical performance of porous carbon materials. To achieve this objective, the whole surface of mesoporous silica (SBA-15) was coated with a thin layer of carbon (about 0.4 nm) with and without N-doping by using acetonitrile and acetylene chemical vapor deposition, respectively. The resulting N-doped and nondoped carbon-coated silica samples have mesopore structures identical to those in the original SBA-15, and they are practically the same in terms of not only the pore size and pore structure but also the particle size distribution and particle morphology, with the exception of N-doping, which makes them unique model materials to extract the sole effect of nitrogen on the performances of electrochemical capacitors and electrocatalytic oxygen reduction. Moreover, the outstanding features of the carbon-coated silica samples allow even a quantitative understanding of the pseudocapacitance induced by nitrogen functionalities on the carbon surface in an acidic aqueous electrolyte.

Deriving retinal pigment epithelium (RPE) from induced pluripotent stem (iPS) cells by different sizes of embryoid bodies.

Pluripotent stem cells possess the ability to proliferate indefinitely and to differentiate into almost any cell type. Additionally, the development of techniques to reprogram somatic cells into induced pluripotent stem (iPS) cells has generated interest and excitement towards the possibility of customized personal regenerative medicine. However, the efficiency of stem cell differentiation towards a desired lineage remains low. The purpose of this study is to describe a protocol to derive retinal pigment epithelium (RPE) from iPS cells (iPS-RPE) by applying a tissue engineering approach to generate homogenous populations of embryoid bodies (EBs), a common intermediate during in vitro differentiation. The protocol applies the formation of specific size of EBs using microwell plate technology. The methods for identifying protein and gene markers of RPE by immunocytochemistry and reverse-transcription polymerase chain reaction (RT-PCR) are also explained. Finally, the efficiency of differentiation in different sizes of EBs monitored by fluorescence-activated cell sorting (FACS) analysis of RPE markers is described. These techniques will facilitate the differentiation of iPS cells into RPE for future applications.

The role of microglia in diabetic retinopathy.

There is growing evidence that chronic inflammation plays a role in both the development and progression of diabetic retinopathy. There is also evidence that molecules produced as a result of hyperglycemia can activate microglia. However the exact contribution of microglia, the resident immune cells of the central nervous system, to retinal tissue damage during diabetes remains unclear. Current data suggest that dysregulated microglial responses are linked to their deleterious effects in several neurological diseases associated with chronic inflammation. As inflammatory cytokines and hyperglycemia disseminate through the diabetic retina, microglia can change to an activated state, increase in number, translocate through the retina, and themselves become the producers of inflammatory and apoptotic molecules or alternatively exert anti-inflammatory effects. In addition, microglial genetic variations may account for some of the individual differences commonly seen in patient's susceptibility to diabetic retinopathy.

MicroRNA expression profiles of human iPS cells, retinal pigment epithelium derived from iPS, and fetal retinal pigment epithelium.

The objective of this report is to describe the protocols for comparing the microRNA (miRNA) profiles of human induced-pluripotent stem (iPS) cells, retinal pigment epithelium (RPE) derived from human iPS cells (iPS-RPE), and fetal RPE. The protocols include collection of RNA for analysis by microarray, and the analysis of microarray data to identify miRNAs that are differentially expressed among three cell types. The methods for culture of iPS cells and fetal RPE are explained. The protocol used for differentiation of RPE from human iPS is also described. The RNA extraction technique we describe was selected to allow maximal recovery of very small RNA for use in a miRNA microarray. Finally, cellular pathway and network analysis of microarray data is explained. These techniques will facilitate the comparison of the miRNA profiles of three different cell types.

Retinoid uptake, processing, and secretion in human iPS-RPE support the visual cycle.

PURPOSE: Retinal pigmented epithelium derived from human induced pluripotent stem (iPS) cells (iPS-RPE) may be a source of cells for transplantation. For this reason, it is essential to determine the functional competence of iPS-RPE. One key role of the RPE is uptake and processing of retinoids via the visual cycle. The purpose of this study is to investigate the expression of visual cycle proteins and the functional ability of the visual cycle in iPS-RPE. METHODS: iPS-RPE was derived from human iPS cells. Immunocytochemistry, RT-PCR, and Western blot analysis were used to detect expression of RPE genes lecithin-retinol acyl transferase (LRAT), RPE65, cellular retinaldehyde-binding protein (CRALBP), and pigment epithelium-derived factor (PEDF). All-trans retinol was delivered to cultured cells or whole cell homogenate to assess the ability of the iPS-RPE to process retinoids. RESULTS: Cultured iPS-RPE expresses visual cycle genes LRAT, CRALBP, and RPE65. After incubation with all-trans retinol, iPS-RPE synthesized up to 2942 ± 551 pmol/mg protein all-trans retinyl esters. Inhibition of LRAT with N-ethylmaleimide (NEM) prevented retinyl ester synthesis. Significantly, after incubation with all-trans retinol, iPS-RPE released 188 ± 88 pmol/mg protein 11-cis retinaldehyde into the culture media. CONCLUSIONS: iPS-RPE develops classic RPE characteristics and maintains expression of visual cycle proteins. The results of this study confirm that iPS-RPE possesses the machinery to process retinoids for support of visual pigment regeneration. Inhibition of all-trans retinyl ester accumulation by NEM confirms LRAT is active in iPS-RPE. Finally, the detection of 11-cis retinaldehyde in the culture medium demonstrates the cells' ability to process retinoids through the visual cycle. This study demonstrates expression of key visual cycle machinery and complete visual cycle activity in iPS-RPE.

Energy storage on ultrahigh surface area activated carbon fibers derived from PMIA.

High-performance carbon materials for energy storage applications have been obtained by using poly(m-phenylene isophthalamide), PMIA, as a precursor through the chemical activation of the carbonized aramid fiber by using KOH. The yield of the process of activation was remarkably high (25-40 wt%), resulting in activated carbon fibers (ACFs) with ultrahigh surface areas, over 3000 m(2) g(-1) , and pore volumes exceeding 1.50 cm(3) g(-1) , keeping intact the fibrous morphology. The porous structure and the surface chemical properties could easily be controlled through the conditions of activation. The PMIA-derived ACFs were tested in two types of energy storage applications. At -196 °C and 1 bar, H2 uptake values of approximately 3 t% were obtained, which, in combination with the textural properties, rendered it a good candidate for H2 adsorption at high pressure and temperature. The performance of the ACFs as electrodes for electrochemical supercapacitors was also investigated. Specific capacitance values between 297 and 531 g(-1) at 50 mA g(-1) were obtained in aqueous electrolyte (1 H2 SO4 ), showing different behaviors depending on the surface chemical properties.

Activated carbon fibers with a high content of surface functional groups by phosphoric acid activation of PPTA.

Activated carbon fibers (ACFs) were prepared by chemical activation of poly(p-phenylene terephthalamide (PPTA) with phosphoric acid, with a particular focus on the effects of impregnation ratio and carbonization temperature on both surface chemistry and porous texture. Thermogravimetric studies of the pyrolysis of PPTA impregnated with different amounts of phosphoric acid indicated that this reagent has a strong influence on the thermal degradation of the polymer, lowering the decomposition temperature and increasing the carbon yield. As concerns surface chemistry, TPD and chemical analysis results indicated that the addition of phosphoric acid increases the concentration of oxygenated surface groups, with a maximum at an impregnation ratio of 100 wt.%. The resulting materials present uncommon properties, namely a large amount of oxygen- and phosphorus-containing surface groups and a high nitrogen content. Porosity development following H(3)PO(4) activation was very significant, with values close to 1700 m(2)/g and 0.80 cm(3)/g being reached for the BET surface area and total pore volume, respectively. The pore size distributions remained confined to the micropore and narrow mesopore (<10 nm) range.

Evidence for two retinoid cycles in the cone-dominated chicken eye.

In the classic retinoid cycle, 11-cis retinol is synthesized in the retinal pigment epithelium (RPE) by two enzymes: Isomerase I (RPE65) and lecithin:retinol acyltransferase (LRAT). The purpose of this study is to provide experimental evidence for two active isomerases in the cone-dominated chicken eye: an LRAT-dependent Isomerase I in the RPE and an ARAT (acyl CoA:retinol acyltransferase)-dependent isomerase (Isomerase II) in the retina. First, we show that whole chicken retina in vitro, removed from the RPE/choroid and sclera, produces 11-cis retinoids upon light exposure, indicating the existence of RPE-independent isomerase (Isomerase II) activity in the retina. Reverse transcriptase polymerase chain reaction studies show high levels of RPE65 expression in the RPE, low levels in the retina, and none in primary Muller cell cultures, indicating the presence of Isomerase I in the RPE and a minimal amount in the retina. Activities of the RPE and retina isomerases were then measured by enzyme assays with specific enzyme inhibitors. 2,2'-Bipyridine, a known Isomerase I inhibitor, and N-ethylmaleimide (NEM), a known LRAT inhibitor, significantly reduced Isomerase I activity but not Isomerase II activity. Progesterone, a known ARAT inhibitor, completely blocked Isomerase II activity but not Isomerase I activity. Thus, this study reports novel results for distinguishing the biochemical properties of Isomerase I from those of Isomerase II, as well a difference in their locations in the chicken eye. On the basis of these differences, the cone-dominated chicken eye must contain two retinoid cycles: a classic visual cycle for retinoid exchange between the RPE and the retina supported by Isomerase I in the RPE and an additional visual cycle for retinoid processing in the retina supported by Isomerase II.

11-cis-Acyl-CoA:retinol O-acyltransferase activity in the primary culture of chicken Muller cells.

A novel retinoid cycle has recently been identified in the cone-dominated chicken retina, and this cone cycle accumulates 11-cis-retinyl esters upon light adaptation. The purpose of this study is to investigate how 11-cis-retinyl esters are formed in the retina. Primary cultures of chicken Muller cells and cell membrane were incubated with all-trans- or 11-cis-retinol to study retinyl ester synthesis. In Muller cells, esterification of 11-cis-retinol was four times greater than esterification of all-trans-retinol. In the presence of palmitoyl-CoA and CRALBP, Muller cell membranes synthesized 11-cis-retinyl ester from 11-cis-retinol at a rate which was 20-fold higher than that of all-trans-retinyl ester. In the absence of CRALBP, 11-cis-retinyl ester synthesis was greatly reduced (by 7-fold). In the absence of palmitoyl-CoA, retinyl ester synthesis was not observed. Muller cell membranes incubated with radiolabeled palmitoyl-CoA resulted in the transfer of the labeled acyl group to retinol. This acyl transfer was greatly reduced in the presence of progesterone, a known ARAT inhibitor. 11-cis-ARAT activity remained unchanged when assayed in the presence of all-trans-retinol, suggesting a distinct catalytic activity from that of all-trans-ARAT. Apparent kinetic rates for 11-cis-ARAT were 0.135 nmol min(-)(1) mg(-)(1) (V(max)) and 11.25 microM (K(M)) and for all-trans-ARAT were 0.0065 nmol min(-)(1) mg(-)(1) (V(max)) and 28.88 microM (K(M)). Our data indicate that Muller cells in the chicken retina possess 11-cis-ARAT activity, thus providing an explanation for the accumulation of 11-cis-retinyl esters in the cone cycle.